平等发球

Equal Tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

The equivalent tee (or straight tee) is utilised as the branch has the same distance across as the run pipe. Equal Tee are equipped for taking care of any high or low weight stream of fluid through it. The equal tee are with the same channel and outlet sizes, however, customers can profit from us “decreasing” tees too that have maybe a couple closes with various in measurement, this is called an equal tee. Because of their dimensional contrast, these tee fittings help with the ability to control the volume when required. Our scope of Equal Tee and Equal Cross are impeccably built utilising most recent innovation and are generally utilised as a part of differing piping frameworks crosswise over commercial ventures. Faultlessly built to flawlessness utilising most recent machines and innovation, these pipe fittings are broadly utilised as a part of a large number of commercial ventures far and wide. Durable in quality, these pipe fittings are accessible at competitive prices.

Stainless steel threaded equal tee

FEATURES OF EQUAL TEE

• There are three female openings in a ‘T’ formed pipe tee.
  
• There are straight pipe tees which have the same size openings.
  
• Equal tee make them open of various size and two openings of the same size.
  
• There are sterile equal tees which are utilised as a part of waste lines.
  
• These sort of equal tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
  
• An equal tee has dragged to attach the fitting to a divider or stud.
  
• An equal tee utilises pressure fittings on two or more finishes.
  
• An equal tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.

Equal Tee Dimensions

The dimensions are in millimeters

Source : ASME B16.9 - 2007



Common types of pipe tee

A pipe tee is a type of fitting that has a T shape and is used to join two or more plumbing pipes.

• Equre tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
• Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run.
• Barred tee is used in pipelines that are pigged.
• Lateral tee has a 45 degree branch from a pipeline.
• Pipe cross is a fitting that used in the place where four pipes meet with the same diameter include:
• Reducing cross used for connecting four pipes, the main pipes with the same size, but the dimensions of the branch diameter is smaller than the main pipes.
• Equal cross in the place where four pipes meet with the same diameter.
• Forged Tee Fittings are pipe fittings that be formed mainly by forging.

Size range: 1/2 to 72 inches

Pressure: SCH5 to SCH160

Materials

• Carbon steel: ASTM/ASME A234 WPB-WPC
• Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
   
• Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
   
• ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
   
• ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
   
• Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6
   
• High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Welding Bevel acc. to standards:

• ASME B16.9, Factory-Made Wrought Steel Buttwelding Fittings
• ASME B16.28, Buttwelding Short Radius Elbows and Returns
• ANSI/ASME B16.25, Buttwelding Ends
• MSS SP-97, Socket Welding, Threaded, and Buttwelding Ends
• Tolerance For butt Welding Fittings

Industrial Processes :        Bending, squeezing, pressing, forging, machining and more

Features of Pipe Tee:

• There are three female openings in a T shaped pipe tee.
• There are straight pipe tees which have the same size openings.
• Reducing pipe tees have one opening of different size and two openings of the same size.
• There are sanitary pipe tees which are used in waste lines. These kind of pipe tees have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste.
• A cross pipe tee has four equal sized female openings.
• A wing pipe tee has lugs to fasten the fitting to a wall or stud.
• A compression pipe tee uses compression fittings on two or more ends.
• A test pipe tee has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe.

Related products of pipe tee:

• Saddle previously is the ventilation ducts 'crotch tee', its shaped like pants, there Equal and unequal diameter, the formal name is "tube tapered pants tee."
• Saddle previously DIN2618 is to replace the existing tee fitting, the use of flexibility, praised by domestic and foreign markets.
• Stainless steel Tee is T-shaped pipe fittings with two outlets, one at 90° to the connection to the main line by stainless.
• Tees straight and reducing- The primary purpose of a Tee is to make a 90° branch from the main run of pipe.
• Wear-resistant Alloy Composite Pipe Tee
   
• Ceramic lined composite Y-type Tee
   
• Ceramic lined composite pipe tee
   
• Aluminum corundum lined lateral wye
   
• Bi-metal clad lateral wye  

Applications of pipe tee:

Pipe Tees are widely used in various commercial and industrial applications. Industrial applications include:

• Chemical processing
• Petroleum
• Pulp/paper
• Refining
• Textile
• Waste treatment, Marine
• Utilities/power generation
• Industrial equipment
• Automotive
• Gas compression and distribution industries
• Pipe Tees are also recommended for industrial plant fluid power systems.

We are manufacturer of Reducing tee and supply high quality Reducing tee in both large and small quantities worldwide &  offer you the best prices in the market.

We have a team of experienced professionals with years of experience in manufacturing.